谘詢熱線
-->
當前位置: 首頁 > 新聞中心 > 公司動態 >

卷簾門的彈簧如何更換?

發布人:http://www.levels4life.com    發布時間:2019-05-21 13:41:01

  卷簾門固然看起來簡單,實踐上卷簾門也是由很多局部組成的,比方卷簾門簾片、電機彈簧等。今天濟南電動卷簾門廠家和大家一同來聊聊卷簾門的彈簧,彈簧關於卷簾門來說也是十分重要的,關於卷簾門的開合起著至關重要的作用。

  Although the rolling shutter door looks simple, in practice, the rolling shutter door is also made up of many parts, such as the rolling shutter curtain sheet, motor spring and so on. Today, Jinan Electric Curtain Door manufacturers and you come together to talk about the spring of the curtain door, spring is also very important for the curtain door, on the opening and closing of the curtain door plays a vital role.

  卷簾門同牆的作用一樣起到程度分隔,它由簾板、座板、導軌、支座、卷軸、箱體、控製箱、卷門機、限位器、門楣、手動速放開關安裝、按鈕開關和保險安裝等多個局部組成,普通裝置在不便采用牆分隔的部位。下麵由濟南電動卷簾門廠家簡述卷簾門彈簧的改換辦法:

  The rolling shutter door acts as a partition to a certain extent as the wall does. It consists of curtain board, seat board, guide rail, support, reel, box body, control box, door winder, limiter, lintel, manual quick-release switch installation, button switch and insurance installation, etc. The common device is inconvenient to use wall partition. The following is a brief description of the method of changing the spring of the rolling shutter door by Jinan electric rolling shutter manufacturer:

  彈簧分為兩種扭簧和鋼璜,扭簧的裝置辦法是為首先用手抓緊扭簧的簧殼麵對人的方向(從正麵)向上一定要抓緊、左手抓緊後然後右手把固定在門體上的螺絲用扳手(工具淞掉)卸下後兩隻手一同漸漸的把彈簧鬆到沒有阻力為止、每個都是這樣以此類推、然後把手動大梁兩邊的卷拄(大梁)螺絲卸下、然後取下來放到地上再把彈簧螺絲卸下,然後新的也照著拆下來的彈簧套上去後固定好螺絲當然了卷拄(大梁)也是依照老樣子都裝好後如今就是開端把彈簧收緊也是關鍵的操作、(其實就是在先前拆下來時往反的方向)收緊到理想的阻力後把螺絲傷筋這樣也就換好了。

20161216904517.jpg

  Spring is divided into two kinds of torsion spring and steel jar. The device of torsion spring is to first grasp the torsion spring shell by hand facing the human direction (from the front) upward, and then grasp the screw fixed on the door body with the left hand (tool shake off) and remove the screw with the right hand. After that, the two hands gradually loosen the spring until there is no resistance. Each hand is pushed in this way, and then the hand moves. Remove the winding screw on both sides of the girder, then take it off and put it on the ground, then remove the spring screw, and fix the screw after the new spring sleeve is removed. Of course, the winding (girder) is also installed according to the old style. Now it is the most critical operation to tighten the spring at the beginning. (In fact, it is in the opposite direction when it was previously removed) tighten to the ideal. After resistance, the screw tendons are replaced.

  總之呢,卷簾門彈簧的改換也並不是隨意就能夠完成的,特別假如平常在運用過程中,卷簾門的彈簧呈現問題,想要改換的話,倡議還是找正軌的濟南電動卷簾門廠家,畢竟還是正軌的廠家比擬,改換過程中也不容易呈現問題。

  In a word, the change of the spring of the rolling shutter door is not optional, especially if the spring of the rolling shutter door presents problems in the normal operation process, if you want to change it, the proposal is to find the right track manufacturers of Jinan electric rolling shutter door, after all, the right track manufacturers are comparable professionals, and it is not easy to present problems in the process of changing.


上一篇:工業提升門和電動卷簾門的區別!
下一篇:卷簾門的芯和棍是怎麽銜接的?
產品中心
聯係向日葵视频app下载ioses网站免费