谘詢熱線
-->
當前位置: 首頁 > 新聞中心 > 公司動態 >

安裝車庫門要掌握哪些術語?

發布人:http://www.levels4life.com    發布時間:2019-08-22 10:19:38

  車庫門在安裝的時候,有一些條款,這些條款代表不同部分和安裝方式,所以,如果你不掌握這些術語,然後處理的時候會感到在黑暗中,更不用說正確的安裝,因此,正確安裝,安裝還需要掌握一些術語,然後簡單地介紹它。

  When garage door is installed, there are some clauses. These clauses represent different parts and installation methods. So if you don't master these terms, you will feel in the dark when you deal with them, let alone install them correctly. Therefore, to install them correctly, you need to master some professional terms, and then simply introduce them.

  一般安裝方式:指左右兩側各安裝一根單軌即可正常工作的分段翻轉門的安裝方式,主要適用於楣高不小於600mm的開口。

  General installation method: refers to the installation of a single rail on both sides to work normally. It is mainly suitable for the opening of lintel height not less than 600 mm.

  高抬式:是指車庫門通過導軌垂直向上運行一段,然後分段回轉運動的一段向上安裝車門的方式。

  Elevated type: refers to the way that the garage door runs up a section vertically through the guide rail, and then rotates up a section to install the door.

  頂部安裝方式:垂直車庫門安裝方式,車庫門全開上方安裝扭力彈簧平衡係統。

  Top Installation: Vertical garage door installation, garage door open above the installation of torsion spring balance system.

  安裝方式:垂直升降安裝方式,扭轉彈簧平衡係統位於全開門的中心位置。

  Installation: Vertical lifting installation, torsion spring balance system is located in the center of the full open door.

  重量(配重)平衡方式:垂直升降門安裝方式,采用配重方式平衡門扇重量。

  Weight (counterweight) balance mode: vertical lifting door installation mode, using counterweight mode to balance the weight of the door.

  推拉式:通過導軌和驅動係統使門風機(單扇、雙扇或多扇)向左右方向推拉式門安裝方式。

  Push-pull type: Push-pull type door installation mode that makes the door blower (single, double or multiple) to the left and right direction through the guide rail and drive system.

  承重式:指車庫門的自重由門頂導軌承重,以承受推拉式門的安裝。

  Load-bearing type: refers to the garage door's self-weight from the top rail load-bearing, to withstand the installation of push-pull doors.

20161214750871.jpg

  承重式:指門的重量由下導軌承重,以承受推拉式門的安裝。

  Load-bearing type: The weight of the finger door is borne by the lower guide rail to bear the installation of push-pull door.

  下承重電機隨動:指安裝在門上的下承重門隨門移動的安裝方式。

  Lower load-bearing motor servo: refers to the installation mode of the lower load-bearing door installed on the door moving with the door.

  全板工業門:是由全板門風機、扭力彈簧平衡係統和導向正消聲器係統組合而成的高強度彩繪鋼板,與卷簾門相比,一般門的麵積和重量更大,安全要求更高。

  Full-plate industrial door: It is a high-strength painted steel plate composed of full-plate door fan, torsion spring balance system and guide positive muffler system. Compared with rolling shutter door, the area and weight of general door are larger, and the safety requirements are higher.

  如果及時掌握這些安裝條件,所以我相信你當安裝車庫門會更容易,有兩次結果一半的努力,因此,掌握外國技術,不僅是一個好方法的掌握不夠或根據不同的產品,安裝一些相關的知識。

  If you master these installation conditions in time, so I believe that it will be easier for you to install garage doors. There are two half efforts. Therefore, mastering foreign technology is not only a good way to master insufficient or install some relevant knowledge according to different products.


上一篇:工業快速門配置應該遵循什麽原則?
下一篇:銀行卷簾門是如何防盜的?
產品中心
聯係向日葵视频app下载ioses网站免费