谘詢熱線
-->
當前位置: 首頁 > 新聞中心 > 公司動態 >

卷簾門電機控製器功率遠大於電機功率!

發布人:http://www.levels4life.com    發布時間:2019-11-05 16:15:05

  卷簾門電機控製器的功率遠遠大於電機的功率,所以滿了電機就會過載,控製器不知道是否要控製幾乎到線。

  The power of the shutter motor controller is far greater than that of the motor, so the motor will be overloaded when it is full. The controller does not know whether to control almost to the line.

  卷簾門廠家控製係統,卷簾門,配套輔料,更重要的是安裝過程!

  Rolling door manufacturer control system, rolling door, supporting accessories, more importantly, the installation process!

  最重要的是控製係統,即電動機和遙控器或開關部分,由於使用頻率和使用環境的要求不同,對使用壽命、噪聲、控製有不同的強調,所以,控製係統總是要!

  The most important is the control system, that is, the motor and the remote control or the switch part. Due to the different requirements of the use frequency and the use environment, there are different emphasis on the service life, noise and control. Therefore, the control system is always necessary!

  簾片的性能也很重要,市場上主要出現的卷簾材料采用有鋁合金(保溫聚氨酯發泡)、鍍鋅鋼帶(也有發泡)、鋁型材(空心);料帶厚度在0.2-0.8mm之間。表麵處理包括烤漆、鍍鋅、環氧樹脂背漆、氟碳等。泡沫材料基本上是不含氟的聚氨酯。卷簾門的材料直接影響卷簾門的性能、絕緣性能、耐候性和強度。

  The performance of the curtain is also very important. The main rolling materials in the market are aluminum alloy (thermal insulation polyurethane foam), galvanized steel strip (also foam), aluminum profile (hollow); the thickness of the material strip is between 0.2-0.8mm. Surface treatment includes baking paint, galvanizing, epoxy resin back paint, fluorocarbon, etc. Foam materials are basically fluorinated polyurethanes. The material of roller shutter directly affects the performance, insulation, weather resistance and strength of roller shutter.

  卷簾門電機控製器的輸出電壓不總是固定的,或者隨著電機轉速的增大而增大。

  The output voltage of the shutter motor controller is not always fixed or increases with the increase of motor speed.

  卷簾門電機控製器不根據電機廳開關速度信號和旋轉角度信號控製電機轉矩。

  The rolling shutter motor controller does not control the motor torque according to the switch speed signal and rotation angle signal of the motor Hall.

  依次關閉卷簾門,在卷簾門完全關閉後再關閉另一扇卷簾門。

  Close the rolling shutter door in turn, and then close another rolling shutter door after the rolling shutter door is completely closed.

20161214750871.jpg

  關閉卷簾門時,要觀察下部是否有雜物,及時有雜物清理。

  When closing the roller shutter door, observe whether there are sundries at the lower part and clean them in time.

  慢轉或無轉

  Slow or no rotation

  主要原因是電機燒壞、電路短路、負載過重或停止按鈕未複位。

  The main reason is that the motor is burnt out, the circuit is short circuited, the load is too heavy or the stop button is not reset.

  然後解決這個故障更換燒毀電機,檢查路線開啟時,攪拌的滑塊限位開關接觸開關觸點,調整開關位置,檢查是否有任何機械部件卡住了,如果有任何需要消除。

  Then solve the problem and replace the burned motor. Check that when the line is opened, the limit switch of the mixing slider contacts the switch contact, adjust the switch position, and check whether any mechanical parts are stuck, and if any need to be eliminated.

  應站在離卷簾門一步遠的地方,在關門過程中,鑰匙不要拉出門鎖,如有異常聲音或異常動作,及時向團隊匯報。

  Stand one step away from the roller shutter door. Do not pull the key out of the door lock during the closing process. If there is any abnormal sound or action, report to the team in time.


上一篇:車間是否要必要安裝快速卷簾門?
下一篇:如何有效增加卷簾門的使用壽命?
產品中心
聯係向日葵污视频下载