發布人：http://www.levels4life.com 發布時間：2020-11-19 17:00:51
With the development of science and technology, our living standard is also increasing, garage door is gradually recognized by us, so how much do you know about it? And what details should we pay attention to when installing the garage door socket? Now let's have a look with Xiaobian. The following is about the garage door installation power socket points for attention and related knowledge of the introduction.
Introduction to the basic knowledge of garage door
1. Self preliminary and understanding of maintenance, first of all, to understand the use of the garage door when the failure occurred and the previous maintenance status, to understand the detailed failure phenomenon and the use of software and hardware environment when the failure occurs, in addition, before the garage door maintenance, we should also understand the hardware and software configuration of the garage door and the service life, so as to achieve a targeted goal
2. Check the external parts of the garage door power supply department first, especially some switches and sockets outside the machine for open circuit and short circuit. Don't think these are unimportant small parts. Practice has proved that many users' garage door faults are caused by this. When the external parts are confirmed to be normal, other tests should be carried out
3. After confirming the cause of the failure, timely contact the professional garage door manufacturer or professional maintenance personnel to deal with it. Unlike other household equipment, garage door maintenance must have excellent professional and technical personnel. The owner should not try to repair it himself. On the contrary, it will cause secondary damage to the garage door and bring higher maintenance costs to your garage door maintenance After the repair is completed, the commissioning and delivery will be carried out for your garage door after the repair of professional maintenance personnel, and the acceptance is completed in the presence of the owner and delivered for use.
Notes on installation position of power socket of garage door
The electric garage door needs electricity, where the power socket is installed, the garage door manufacturer is only a small problem. Many users, including real estate developers, do not necessarily consider the problem when installing the power supply. After the electric garage door is installed, it is found that the power position is wrong, and then change, resulting in unnecessary waste.
The motor outlet of the electric garage door is generally about 1.5 meters. Where the power supply is installed depends on what kind of electric garage door is installed. The motor of the flap garage door is located back in the middle of the garage. The position of the power supply at the back depends on the height of the door opening. Generally, the height of the door opening plus one meter should be similar. For example, if the door opening is 2.5 meters high, then the power supply is installed in the middle of the door opening 3.5 meters from the back.
If you are going to install the rolling shutter garage door, the power socket should be installed on either side of the door opening, which is about one meter away from the door opening.